品牌：ARISE恩睿斯

型號：S600S800

適用場所：工業

具體參數（物料重量、推力大小、行程）和詳細價格請先咨詢客服謝謝！咨詢電話：13127754666

ERIVE驅動器

采用進口步進電機，精密磨制滾珠絲杠，終身免維護，可根據不同需求，配備不同的行程、安裝方式、響應速度，自帶左右限位開關，可在外部調節。

采用進口伺服電機，并配備1000線增量式編碼器，在驅動速度加快的同時，精度得到了大大的提高。可以實時反饋絲杠位置，無需任何回中開關、限位開關，并且可以一鍵識別機械行程，精密磨制滾珠絲杠，終身免維護，可根據不同需求，配備不同的推力、行程、安裝方式、響應素的。

Using imported stepping motor, precision grinding ball screw, liftime free maintenance, according to different needs, matching With different travel, installation and response speed, with the left and right switch, it can be adjusted outside.

With the imported servo motor and 1000 wire incremental encoder, the precision is greatly improved while the driving speed is quicker. Sure Real-time feedback screw position, withoutand back switch, limit switch, and can one key to identify mechanical stroke, preci-sion grinding ballscrew, Life free maintenance, according to differ-ent needs,equipped with different thrust, stroke, installation way,response speed.

CONTROLLER控制器

N180/N200

N180是一款操作簡單、經濟實用的糾偏控制器，采用32位雙核處理器，能夠確保精確和可靠的糾偏效果，能夠滿足一臺500米/分鐘的糾偏系統要求，將安裝調試和售后的花費撿到最低。

N200是在N180糾偏的基礎上增加了0-4A輸出，可以直接驅動磁粉制動/離合器?？刂颇Ｊ街С质謩?dòng)、外部模擬量、錐度模式。

N180 is a simple, economical and practical correction controller that can ensure accu-rate and reliable correction. The effect can meet the requirement of a 500 merer/minute rectifying system and reduce the cost of installation and after sale. To the lowest.

N200 is an increase of 0-4A output on the basis of N180 correction, witch can directly drive the magnetic powder brake/clutch. The control mode supports manual, external analog, and taper mode.

S600是一款高性能伺服糾偏控制器，采用64位雙核處理器，可以直接驅動帶編碼器的伺服電機，按鍵式操作簡單，環形偏差顯示更直觀。

S600 is a high performance servo rectifying controller that can drive the band encoder directly. The servo motor, the key operation is simple, the ring deviation shows more intuitionistic.

S800

S800是一款高端糾偏控制器，采用64位四核處理器，直接驅動帶編碼器伺服電機，采用全觸摸屏操作，八國語言顯示，操作簡單，使用方便。

S800 is a high-end deviation correction controller, witch derectly drives the servo motor with encoder, adopts full touch screen operation, displays in eight languages, and is easy to operate and use.

INFRARE紅外線

A100是一款紅外線糾偏傳感器，可檢測紙張、印刷膜、薄膜、無紡布、紗布、紗窗等材料的邊緣，最適合帶網孔的材料邊緣檢測，不可用于超透明材料檢測。可在3萬伏靜電環境、大功率變頻器干擾下正常使用。

A100 is an infrared correction sensor, which can be used to detect paper, printing film, film, non-woven fabric, gauze, screen window and other materials. The edge detection is the most suitable for material edge detection with mesh holes, which can not be used for ultra transparent material detection.

CCD影像傳感器

AE400是一款CCD影像傳感器，采用松下CCD傳感器和鏡頭，64位雙核CPU，采樣時間0.1us，環境光線自適應，可跟蹤各種材料的邊緣、印刷圖案的邊緣，跟蹤材料對比度變化，跟蹤各種印刷線（連續線、斷續線、雙線）。實時彩色圖像顯示，全觸摸操作更簡便。

AE400 is an CCD image sensor, using an imported CCD sensor and lens, ambient light Adaptive, can track the edges of warious materials, the deges of the printed pattern, and track the contrast of the material. To track all kinds of printing lines (continuous line, intermittent line, double line). Real time color image display, whole Touch operation is more convenient.?

ULTRASONIC超聲波

A200是一款超聲波糾偏傳感器，采用富士高頻超聲波探頭，可檢測紙張、印刷材料、薄膜、透明及超透明材料等的邊緣，可適應放卷、收卷、烘箱出口等環境，不可用于檢測帶網孔材料?？稍?萬伏靜電環境、大功率變頻器干擾下正常使用。

A200 is an ultrasonic deviation-correcting sensor, which adopts Fuji high-frequency jltra-sonic probe and can detect the edges of paper, printing materials, films, transparent and jl-tra-transparent materials, etc. It can adapt to unwinding, winding, oven outlet and other en-vironments, and cannot be used to detect materials with meshes. It can be used normally.